Raspberry Pi 5 and Recalbox

Posted on July 21, 2024 by Viljami

I made a decision and went and bought the latest Raspberry Pi computer. It is officially called Raspberry Pi 5. It is a very powerful computer and it costs only about 100 euros. You also have to buy some accessories with it so you can make it usable. You have to buy a cable or two and maybe a cover and also memory card and a controller. All pieces included the total price was, I think, maybe 250 euros.

This is still very cheap when you consider that this thing has 8 GB of RAM. The performance is very good. I decided to pair this with an operating system called Recalbox that enables you to turn your Raspberry Pi 5 into a retro gaming machine. I have installed the OS and found some emulators to be working while others seem to have some issues. But if you consider that this is very much something that you have to really spend time and inspect carefully I think the functionality of this thing is very good.

I decided to include in this small setup an Xbox Series controller. I picked a nice lime colored model. The controller alone cost only 50 euros. I connected it with a 3 meters long USB-C to USB-A cable. So, I am not using Bluetooth to connect the controller but that can also be done if you need that functionality. I think setting up Bluetooth controller seems to be an easy task since Raspberry Pi 5 has Bluetooth integrated in its circuitry.

I connected my Raspberry Pi 5 to my LAN network with an Ethernet cable. Moving BIOS and ROM files from your main computer to the Raspberry Pi computer is fairly easy. I think there is some kind of a limitation that makes moving large files, over 5 GB of size, impossible when using Windows network. Or at least it wasn’t possible when I tried it out. Of course you can pick out the memory card and move the file directly to it. That might be the solution.

I picked a memory card that has a size of 128 GB. The type of the memory card that Raspberry Pi 5 uses is microSD. There is a connection for HDMI output so you do need a special cable for that too. The HDMI cable I used is a HDMI to Micro HDMI. As there are several different pieces of hardware it can take some time to plan what parts you really need and should buy.

Installing Recalbox is not so complicated if you have some experience of installing operating systems to PCs or to Raspberry Pis. I am leaving this part also for you to search for through internet. I think you can find these instructions very easily. I used a program on my Windows 10 called Raspberry Pi Imager. I think you should use this program also.

There are some competitors available for Recalbox. You can try also Lakka OS or RetroPie. I actually first tried Lakka OS but after all I was more convinced with how Recalbox worked. RetroPie even didn’t have yet an image file for Raspberry Pi 5 so the installing of it would have been an exercise of some extra thinking. Recalbox was the best as it was easiest to install and I have noticed very few issues with it.

Of course you need also the games and game systems BIOS files. So you need to move the ROMs from your PC to your Raspberry Pi 5. You can find games easily from internet. They might be sometimes fractured somehow and there can be bugs. To eliminate this you should rip your games from actual CDs or DVDs. This is especially easy if you are emulating PlayStation 1 or 2. Also, I have to mention that downloading games is actually against the law. Also, if we are strict, you would have to rip also systems BIOSes from a system that you actually own. I actually had an issue with a downloaded game and I came to senses that it had a bug that freezed my game and made it impossible to carry on forward playing it.

So I have had time to experiment with my Recalbox OS. I now have a system that supports mainly and most importantly PS1 and Dreamcast along with many other gaming systems with a bit lower specs. I haven’t been able to get GameCube games running. Also the PS2 emulation is under work right now for me. I also found out that N64 games work but they somehow don’t respond to game pad input at all. So, this is also under work.

If you aren’t afraid of some fiddling with the hardware and software, like moving some ROM and BIOS files to their proper paths and maybe renaming the files correctly. a Raspberry Pi 5 with Recalbox OS can be a fun project for you. It is very easy to check if correct BIOSes have been setup properly. There is a text file generated after the BIOS check has been run from the user interface of Recalbox that clearly states what BIOS files are needed and also which ones are optionally needed.

Could This Be The Answer?

Posted on June 3, 2023 by Viljami

With all these hardware consoles you get a sense that there could be an easier solution. This answer would be in this case one single personal computer connected to the 4K telly with a single HDMI cord. It would take only one HDMI port. This isn’t a hallucination. There already are several computers available for this task. It doesn’t take a rocket scientist to figure out that the power that one modern PC today holds can handle almost any gaming console emulator from NES to PS4.

You would need one PC. This would cost something from 300 euros to several thousands of euros. You would also need a controller. I prefer Xbox Series S/X controller when it comes to emulator gaming. If you would like to change a controller between systems you would need to assign keys over and over again. You could be able to make a profile for every controller of every system. However it would be easier to play all systems with only one controller.

The first thing you need with this kind of setup is a reliable Linux operating system dedicated to emulation. At first it seems I would choose Lakka OS. It is a nice emulator that allows you to run several different emulators of different gaming systems. After setting up you don’t need to actually unplug your controller or get to your keyboard at all. So, I prefer Lakka OS. There are other operating systems available, like Retropie, Recalbox and Batocera. The last mentioned can be run from inserted USB stick without any other kind of installation.

If you want to play emulated games on systems like GameCube, PS2, original Xbox and Sega Dreamcast, you will need a powerful computer. I would say that you need more than a Raspberry Pi 4 can provide. I am not going to give you detailed specifications here. We can of course check what are the recommended requirements for an emulator like PCSX2. We can get to a conclusion that you would need at least 8 GB of RAM and a GPU with something like 4 GB of VRAM and capability to run DirectX 11 or OpenGL 4.5. Well, what about the processor? The processor would need to support AVX2, have a rating of 2600 and have four cores with or without hyper threading.

This kind of an emulation station could be your solution to this very interesting question. As prices of games are ricing this would make your wallet heavier at least for a while and enable you to play lots of retro game content. There is of course also the question about breaking every copyright law that exists. This is a difficult matter. Let’s just say that it is not legal to load hundreds of games from internet for free. While this is illegal there seems to be very few choices. You can pay hundreds of euros of games that cannot or are very hard to rip to ROM file and play with your emulator. Some emulators need also the BIOS of the system they are emulating.

Nintendo has been busy bringing its retro content available for those that have an online Nintendo account. You can probably figure how popular retro games currently are. It must be stated that it would be nice, for us game hobbyists, to be able to somehow get our hands to this content for a reasonable price. Playing original games on original hardware is becoming more and more expensive. And it must be said that game consoles don’t last for several decades and must be at some point at least repaired.

Gaming with Raspberry Pi

Posted on August 13, 2021January 11, 2022 by Viljami

So I have this old Raspberry Pi 1 that I got back in about 2011. While it has many uses I haven’t utilized it in a while. What makes this interesting for the readers of this blog is that it can be used for retro gaming. While it is not able to run decently games that have 3D graphics it is perfectly good for playing retro video games like SNES games to give an example. Newer Raspberry Pis are capable of running some more advanced games that have 3D graphics. It is also not a bad choice to pick up a NVIDIA Shield if you are interested in emulated retro gaming and you want to be able to run games with 3D graphics. Shield can even run some Sega Dreamcast with Sony PlayStation games. If you want to be able to run PS2 games I think this is not, at least yet, your way to go.

So we have this Raspberry Pi 1. It has many ways that you can connect different equipment to it. It has two slots for USB. The connections are white which tells us that they are of type USB 2.0. This doesn’t affect us so much. The connections could be colored blue that only tells that they would be a bit more advanced and more effective in transmitting data through them. But for a USB controller or even Bluetooth dongle would work with USB 2.0s just fine. You can even expand these USB slots with an USB hub. It can provide you more USB slots.

If you don’t want to sacrifice one USB slot for Wi-Fi dongle you can connect your Raspberry Pi to your network and internet with an Ethernet connection. There’s no Wi-Fi built in the first Raspberry Pi but some newer models also have this feature included. So you might want to consider buying for example Raspberry Pi 4 instead of the first release. The first release also only supports SD memory card up to 32 GB. While this is just enough to support playing retro games, it might be too small for some uses. There is HDMI connection which delivers the sound and the picture from the computer to the display. There’s also a slot for video output and a small slot, actually a mini-plug connection, for audio output. Raspberry Pi also needs a power input that is provided with 5V micro USB connection. You can probably use your old smart phone’s cable for this, that is you have one available.

You get that Raspberry Pi needs a memory card and a power cable to work. You will also need a keyboard, maybe even a mouse, a cable for Ethernet and an HDMI cable. That’s just for setting up. You have to install yourself a good operating system. For gaming I would go with RetroPie or Lakka OS.

Here’s some links:

https://retropie.org.uk/ and https://www.lakka.tv/

There are many ways that you can get the image file to your memory card. You can probably read some deeper instructions from those links that are above this text. It depends on your host operating system but I know that you are able to make the installation with Windows and Linux PCs.

After getting the software installed you need to fiddle around a bit with the settings. You can usually just connect your game pad and configure the controls. After that you only need to use the Raspberry Pi with your controller. You need to transfer the roms to your device also. This can be done in several ways. You can for example transfer them to USB stick or you can transfer them from your local network. I am not getting to this since this blog post is not actually a tutorial. I am only discussing about the possibilities and I am trying to give you a clear picture for what it is like to get your old, dusted, Raspberry Pi to work for you as a gaming device.

I really think that this is all about this subject. You can run your SNES, NES, Mega Drive/Genesis, Master System, DOS and Atari 2600 games like this (just to mention some of the most popular systems). I would recommend for your game pad Logitech’s or a USB SNES pad although there are plenty of possibilities. Some controllers might not work so don’t try to plug your PS4 controller in as it won’t probably work and would need some fiddling.

Intensive Gaming Diary

Tag: retropie